- Structure Size
- Available Funding
- Building Design
- Local Climate
- Area Weather Conditions
- Aesthetic Preferences
In certain scenarios, a horizontal design is the best option, and this particular style needs the right maintenance to prevent roof leaks. A flat design lies horizontal to the structure or has a minimal pitch. The materials used to protect a no- to low-pitch covering from water are referred to as the membrane. Water on the covering runs off either due to a small incline or by means of a gutter or drainage system to keep this area dry. A commercial roofing company has the experience necessary to make the most rewarding recommendations when determining if this style is an optimal choice.
Roof Leaks: What Outside Elements Affect the Dependability?
The materials used greatly depend on the environmental conditions of the installation location. Warmer climate regions experiencing less rainfall are well suited for concrete or another hard form of material. Areas where excessive rain or freezing is common call for alternative materials such as tar or a form of tarpaper with a layer of gravel over it. These methods protect the structure from heat, ultraviolet rays, and area weather conditions. The decking portion consists of plywood or another form of board, which is then covered by tar or a combination of tarpaper and gravel.
A horizontal covering has many benefits when cared for correctly; however, roof leaks occur quite often due to lack of maintenance. Improper upkeep causes the gravel to be altered or removed completely from the tar. Weather or direct sun exposure is the typical result with crackling or blistering occurring over time. After a significant time of neglect, water begins to seep into the internal portion of a building. Commercial roofing companies recommend a yearly inspection to prevent extensive damage from these types of unnoticed problems.
Seepage remaining undetected for a long period results in decking penetration, insulation damage, and substantial internal harm. An unknown roof leak causes the underlay of a covering to remain wet and results in a weakened, rotting structure. This situation eventually leads to costly damage and possible health complications to those occupying the building. Gravel or debris blocking the drainage system causes the materials to weaken in one or many areas. Pressure buildup in the drainage system creates seepage problems that call for expensive repairs. A flat style needs continuous care to remain in good condition and provide the desired protection. A commercial roofing company offers preventative care options to avoid the above scenarios. Having a yearly or semi-annual inspection along with regular maintenance performed on a covering allows problems to be detected early. Owners are able to prevent costly repairs or entire roof replacement by taking this route.